Recommended Project 6 - ATmega 128 Prototyping Board

• Uses 64-pin ATmega128/1281/2561.
• USB-serial interface via FTDI FT232RL.
• Selectable power (USB/External/VTarget, external could be 5V or 3.3V).
• Selectable clock source (crystal or clock from FT232RL).
• All ports are avaiable at pinheaders.
• Direct interface to GU300 Graphical VFD's.
• Port D, E & F are laid out identical to the STK500.
• Port A, C & G are in a single header, making it possible for future memory expansion.

Details can be found HERE

• Tweet
• Share
• Share
• Share
• Share